Miscellaneous Jobs 12/23/2008   Painter Sprays surfaces of machines, manufactured products, or working area with protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer. Cleans grease and dirt from product. Applies masking tape over parts and areas that are not to be coated. Fills cavities and dents with putty to attain smooth surface. Selects and mixes coating liquid to produce desired color. Pours coating liquid into spray container and connects gun to airhose. Turns sprayer valves and nozzle to regulate width and pressure of spray. Pulls trigger and directs spray onto work surface to apply prime or finish coat. Coats areas inaccessible to hand sprayer with brush. Cleans spraying equipment and brushes with solvent. Heats and sprays wax onto products after they are tested. Removes rust from metal with acid, wire brush, or steel wool...   Company Name:  General Dynamics C4 Systems Apply for this Position   12/10/2008  2152 Expeditor The purpose of this job is to ensure the orderly and timely flow of component parts, subassemblies, and assemblies through each department in the group (Panel, Paint, Final Assembly, and Crate Departments) in sufficient time to meet the requirements of the production schedule and fill in as required for any leadman. • Prepares a variety of letters, memorandums and reports in an accurate and efficient fashion. • Proofreads typed material...   Company Name:  General Dynamics C4 Systems Apply for this Position   12/03/2008   Records Retention Manager/Policies Management •Ensure the proper maintenance, protection, retention and destruction of all records in compliance with governmental, tax, legal, regulatory, and operational requirements. •Control the volume of records maintained in offices and on computer storage devices, and provide for the regular transfer of inactive and low activity records to storage, thereby savings space and making active records more easily accessible. •Ensure that selected materials are properly transferred to storage to prevent accidental destruction or loss, thereby contributing to the integrity and security of SATCOM data. •Bachelor's Degree with experience in records management or similar environment. •Certification in Certified Records Manager (CRM); Enterprise Content Management (ECM); or Electronic Records Management (ERM) desired. •Knowledge of records management laws and regulations •Excellent communication skills, both written and oral with experience in training, teaching or public-speaking •Strong leadership skills, interpersonal, organization, planning and decision-making skills required. •Knowledge of statutory, regulatory and legal requirements related to records and electronic records management. •Knowledge of current and emerging technology related to records management. •Lifting and moving boxes of records, data entry activities as needed. •Familiarity with discovery requests, subpoenas and litigation in general •Good knowledge of Document Management Software and multimedia solutions, imaging systems and automated databases. •Ability to work effectively with all levels of personnel •Ability to manage effectively coordinates resources and work well independently. POLICIES Management •Review, edit, and standardize documentation prepared by other writers within the organization. •Evaluate documentation prepared by others for overall written quality. Provide confident feedback, and make the necessary grammatical or creative adjustments to improve overall document quality and flow or to utilize the most effective and concise terminology. •Create, edit, and maintain technical and procedural documentation by documenting internal templates, policies, processes, or procedures. •Collaborate with all areas of the business to maintain an efficient, compliant document control system...   Company Name:  General Dynamics C4 Systems Apply for this Position   11/25/2008   Field Technical Specialist The candidate must be able to troubleshoot the hardware down to card level to determine if a firmware or hardware fault exists, and repair it. Hardware includes Cisco systems, Windows and Solaris-based computers, printers and projectors. Candidate will be responsible for the maintenance of repair center documentation, tracking repairs and parts status. All documentation and procedures are governed by ISO 9001 quality standards. Must be a self-starter who thrives in an environment with little supervision. Must be comfortable in a customer service role that frequently interfaces with military and civilian personnel of all ranks. Applicant selected will be subject to a security investigation and must meet eligibility requirements for access to classified information. Candidate must be able to travel frequently. Must be willing to deploy to SWA. Requires a valid U.S. driver’s license and the ability to obtain an international driver’s license. Education/Experience Required: AS Degree in Computer Science, or equivalent trade school/military training. Minimum of nine years experience in the installation, assembly, operation and/or maintenance of electronic/electro-mechanical equipment utilizing state-of-the-art technology. Must be able to travel 20% of the time. Applicant must be a US Citizen...  Company Name:  General Dynamics C4 Systems Apply for this Position   11/22/2008    2139 Composites Fabricator I Under general supervision, builds a variety of reflectors using composite materials, and detailed drawings and instructions. • Bag parts and/or tools for curing to standard requirements. • Layout locations for holes, bushings, inserts, etc. to drawing specifications. • Cut, trim, and drill composite parts to drawing specifications. • Prepare and bond fittings, inserts, etc. to drawing specifications. • Install bushings and other hardware to drawing specifications. • Setup and operate computer controlled curing oven. • Perform miscellaneous tasks using hand tools, power tools, and forklift. • Perform tasks required for lifting and moving parts and assemblies. • Procure parts and supplies as needed. • Perform work area cleanup and safety related duties. • Perform other related duties as assigned by management. • Comply with all SATCOM policies, procedures and regulations. • Work during scheduled hours. • Maintain quality output while meeting department production...   Company Name:  General Dynamics C4 Systems Apply for this Position   11/22/2008    Shipping & Receiving Clerk Best commercial packaging practices to protect wave guide components Self starter able to work overtime to complete daily shipments5 years previous experience 5 years Forklift experience CA drivers license with acceptable DMV printout. UPS, FED-X web site working knowledge Best commercial packaging practices to protect wave guide components Applicant must be able to pass an extended background investigation (EBI) for this position...   Company Name:  General Dynamics C4 Systems Apply for this Position   11/21/2008    2143 Welder/Fitter II ALUM Under general supervision, interprets drawings, sketches, and/or preliminary designs. Assembly of detail parts into structures in such a manner that the welders can follow up. Welds ferrous and/or nonferrous metals using MIG and TIG. Must pass welding and fitting certification tests. Essential Functions: • Performs tasks of substantial variety and complexity, which require a thorough knowledge of fitting techniques, materials, tools, machines and equipment. • Grinds, bevels, and welds; chips weld slag. • Works from engineering drawings, rough sketches, verbal instructions, etc. • Inspects completed work for performance to specification. • Performs work area cleanup and safety related duties. • Fits assemblies in such a manner that would allow the welders to be able to meet the guidelines of code. • Welds to meet AWS D1.1 or D1.2 Guidelines. • Complies with all Company policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements...   Company Name:  General Dynamics C4 Systems Apply for this Position   11/19/2008    2119 Designer II Design, detail, and document component assemblies and installations utilizing the appropriate hardware and materials. Supervise and advise other designers and drafters. Essential Functions: • Follow instructions of the Department Manager, supervisor, or design engineer. • Research Vendors and their equipment. • Gather design information from engineers, project documentation and customers. • Check documentation and designs of peers. • Drafting. • Create with little or no supervision: - Drawings and Layouts using Autocad. - Block Diagrams and Schematics. - Bills of Materials using Company Procedures. - Procurement Specifications and Requisitions. - Cost Estimates for Marketing. • Perform other related duties as assigned by management • Work under the immediate direction of the Department Manager or supervisor. • Properly use of • Company facilities, equipment and supplies. • Protect Corporate proprietary documentation. • Comply with Company policies and regulations. • Use safe conduct. • Respect other employees and their personal property. • Work during scheduled hours. • Perform tasks in a timely manner. • Practice neatness. • Maintain quality output while meeting department production requirements...   Company Name:  General Dynamics C4 Systems Apply for this Position   11/18/2008   Principal Designer - Human Sciences Works effectively in interdisciplinary teams to develop Human-Centered solutions. Leads teams to deliver non-conventional problem solving, user experience development, and visual interaction design. Plans, manages, and executes design activities for software components, and the manner in which these components interact with each other. Aggregates group ideas and vision into meticulously executed, beautifully rendered, and acutely focused specification documents, concept documents, and creative briefs. Accepts and solves the most difficult design problems in the areas of Human-Science, and Interaction Desgin. Continues to expand knowledge in domain of expertise. Expertise is sought out regularly. Displays a depth of knowledge across multiple technical and creative areas. Mentors less experienced designers to include identified Most Effective performers. Participates in and/or leads development of design strategies and teaming strategies on multiple projects. Strong advocate of continuous process improvement. Leads large sized continuous process improvement efforts. Researches and integrates design strategies, product specifications, and user expectations into product capabilities. Develops and uses user personas and operational scenarios to test and validate design decisions. Unlimited contact within the entire division. Effectively bridges functional boundaries through listening to and comprehending co concerns of technical, design and management communities.BS Degree in interaction design, communication design, or similar. 18+ years of demonstrated results, or equivalent experience. Advanced Degree recommended. Active in continuous learning. Mentors multiple members of the team. Lead technological & team efficiency problems. Develops team solutions with little oversight. Leads the exploration of business concepts in area of expertise. Demonstrates Leadership as follows: Applies existing technology to create new opportunities for the business & the team. Demonstrates comprehensive understanding of the principles of experience design, information architecture, human science, and/or visual interaction design. Demonstrates ingenuity in creating opportunity in the face of risk. Breaks down barriers to progress & motivates junior members of the team to action. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance.  Company Name:  General Dynamics C4 Systems Apply for this Position   11/07/2008   Machinist, Prototype Machine prototypes and small run production runs of precision RF microwave components. Utilize conventional mills, lathe, CNC mill and lathe centers, drill presses and grinders. Perform own set-up, prepare tooling and fixtures. Work with close tolerances. Interpret engineering drawings and follow verbal instruction with minimal supervision. Good communicator and versatile team player. Minimum of 10 years of machining experience. Tooling and prototype experience preferred. Vocational school or High School or GED equivalent. Read and understand engineering drawings and specifications. Mathematical skills to perform basic calculations. Perform own set-ups. Own and knowledgeable in inspection tools.  Company Name:  General Dynamics C4 Systems Apply for this Position   10/01/08  2148 Industrial Painter I THIS POSITION IS OPEN IN KILGORE, TEXAS Under general supervision, prepares surfaces and applies appropriate coatings to details and assemblies using spray methods of painting with baked-on air dry paints. Verifies product meets or exceeds quality system standards through inspection and documentation. • Prepares surfaces and applies coatings to details and assemblies. • Conducts daily cleanup of equipment and work area to fulfill proper work area painting environment requirements. • Assists in the procurement of needed supplies and materials. • Performs safety-related duties and other duties as assigned by supervisor. • Reads and understands drawings, BOM’s, work orders, and SOFA’s. • Performs quality inspections using inspection equipment and quality standards. • Provides documentation of inspection process. • Assists in job assignments to lower level employees. • Performs safety related duties and other duties as assigned by supervisor. • Complies with all Company policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. • High school graduate or equivalent preferred. • Two to three years of experience industrial and metal finishing process required. • Knowledge and understanding of Company paint specifications for required finishes. • Knowledge of inspection equipment, such as electrical and mechanical paint thickness gauges, micrometers, • Knowledge of dry booth painting. • Knowledge of proper surface preparation prior to painting. • Knowledge of painting equipment used. • Interpersonal skills to cooperate and work effectively with others. • Ability to understand complex drawings, work orders and BOMs. • Ability to evaluate work conditions and quality of work produced. • Ability to work in tight spaces. Machines and Equipment Involved: • Air spray-painting rigs • Air make-up systems • Airless spray-painting rigs • Viscosity cup • Dry Booths • Paint mixing equipment • Blowers • Drills • Sanders/blasters • Riggers • Chemical test kits • Cranes • Forklift • Paint thickness gauges Company Name:  General Dynamics C4 Systems Apply for this Position   09/18/08   2139 Composites Fabricator III Under general supervision, builds a variety of reflectors using composite materials, and detailed drawings and instructions. Essential Functions: • Bag parts and/or tools for curing to standard requirements. • Layout locations for holes, bushings, inserts, etc. to drawing specifications. • Cut, trim, and drill composite parts to drawing specifications. • Prepare and bond fittings, inserts, etc. to drawing specifications. • Install bushings and other hardware to drawing specifications. • Setup and operate computer controlled curing oven. • Perform miscellaneous tasks using hand tools, power tools, and forklift. • Perform tasks required for lifting and moving parts and assemblies. • Procure parts and supplies as needed. • Lay up molds per drawing specification. • Wet lay up parts per drawing specification. • Set up molds per drawing specification. • Perform work area cleanup and safety related duties. • Perform other related duties as assigned by management. • Comply with all Company policies, procedures and regulations. • Work during scheduled hours. • Maintain quality output while meeting department production. Company Name:  General Dynamics C4 Systems Apply for this Position   09/13/2008   2143 Aluminum Welder/Fitter II THIS POSITION IS OPEN IN KILGORE, TEXAS Under general supervision, interprets drawings, sketches, and/or preliminary designs. Assembly of detail parts into structures in such a manner that the welders can follow up. Welds ferrous and/or nonferrous metals using MIG and TIG. Must pass welding and fitting certification tests. •Performs tasks of substantial variety and complexity, which require a thorough knowledge of fitting techniques, materials, tools, machines and equipment. •Grinds, bevels, and welds; chips weld slag. •Works from engineering drawings, rough sketches, verbal instructions, etc. •Inspects completed work for performance to specification. •Performs work area cleanup and safety related duties. •Fits assemblies in such a manner that would allow the welders to be able to meet the guidelines of code. •Welds to meet AWS D1.1 or D1.2 Guidelines. •Complies with all Company policies, procedures and regulations. •Works during scheduled hours. •Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. •Various wrenches (e.g., hammer, pipe, combination, adjustable) •Hammers (#2 to #18) •Come-a-longs •Chains, slings, and boomers •Brooms •Welding power supply •Wire Feeders •Cutting torch POWER TOOLS •Drills •Impacts •Ratchets •Grinders •Needle scaler •Sander •Rolls •Overhead crane •Plate magnets USER-MOVED EQUIP. •Wheelbarrows •Dollies •Pallet jack USER-POWERED EQUIP. •Vehicles •Forklift QA TOOLS •Basic precision dimensional inspection and layout tools and gauges •Optical instruments, transit, theodolite, levels, and optical theodolite system •Granite surface plate and related equipment •Electrical multimeter, chemical test kits, coordinate measuring machine •Must be able to pass welding and fitting tests. •Reading comprehension skills to understand work orders or written instructions. •Math skills to perform basic calculations. •Oral communication skills to exchange information with co-workers and supervisor. •Interpersonal skills to cooperate and work effectively with others. •Ability to work under time pressure. •Hand eye coordination, depth perception. •Ability to see things clearly that are beyond arm’s reach. •Ability to see small detail. •Ability to climb ladder. •Ability to maintain balance on catwalks and narrow work spaces. •Ability to stand for long periods of time. •Ability to work in awkward positions. •Ability to set up, operate, and maintain specialized tooling and fixtures. Company Name:  General Dynamics C4 Systems Apply for this Position   09/12/2008  2143 Welder II STEEL Under general supervision, welds ferrous and/or nonferrous metals using MIG and TIG. Performs all work in adherence to safety and quality procedures. Maintains clean work area. Must be capable of passing welding certification tests and blueprint reading of welding symbols. Essential Functions: • Performs simple, routine, and repetitive tasks using standard welding procedures, tools, materials, machines, and equipment. • Grinds, bevels, and welds; chips weld slag. • Performs work area cleanup and safety related duties. Non-essential Functions: • Operates a motor vehicle. • Operates a forklift. • Performs other related duties as assigned by management... Company Name:  General Dynamics C4 Systems Apply for this Position   09/11/2008   Configuration Specialist I Within the Information/Configuration Management function, provide assistance with product definition (documents and drawings) and facilitate and manage changes to that product definition in both the printed copy and electronic environment. Understand Government/Military documentation systems and document/part numbering systems. Have the ability to read and understand technical documents such as interconnect diagrams, schematics, logic diagrams, fabrication drawings, assembly drawings and associated parts and wire lists. Possess a basic understanding of product identification, the document change process and status accounting. Log and maintain all deliverable third party contracted software and COTS. Responsible to maintain project configuration logs.AA degree desired. 2–4 years experience in configuration/information management of Government contracted product development programs is desired. Knowledge/experience with personal computer operations as well as various computer applications is fundamental. Experience with UNIX operating system Rational tool suite (ClearCase, ClearQuest, ClearDDTS & ClearMake) and large distributed applications (Pro/PDM, TeamCenter and Oracle) would be very useful. Good interpersonal and organization skills are a necessity. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/28/2008  2143 Welder II STEEL Under general supervision, welds ferrous and/or nonferrous metals using MIG and TIG. Performs all work in adherence to safety and quality procedures. Maintains clean work area. Must be capable of passing welding certification tests and blueprint reading of welding symbols. Essential Functions: • Performs simple, routine, and repetitive tasks using standard welding procedures, tools, materials, machines, and equipment. • Grinds, bevels, and welds; chips weld slag. • Performs work area cleanup and safety related duties. Non-essential Functions: • Operates a motor vehicle. • Operates a forklift. • Performs other related duties as assigned by management... Company Name:  General Dynamics C4 Systems Apply for this Position   08/26/2008    RF Assembler Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for RF Assemblers. Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/21/2008  Space Weather Scientist Atmospheric and Environmental Research (AER) has an opening for a research scientist in the area of Space Weather nowcasting and forecasting. Applicants are sought to assist in the development of both theoretical and empirical data assimilation models. Specific areas of interest are coupled space model applications for use in operational systems within the Air Force, but all candidates with the necessary skills and career interests are encouraged to apply. The work involves participation in programs that include model development, real-time data assimilation, validation, and product development. The hire will also participate in presenting results and in writing reports and proposals. Candidates should have an MS or Ph.D. degree or equivalent work experience in atmospheric science, physics, mathematics, or a related field and be skilled with FORTRAN, C, and IDL programming in a UNIX environment. Company Name:  General Dynamics C4 Systems Apply for this Position   08/15/2008  Army Infantry Training Subject Matter Expert The candidate will be a Subject Matter Expert in Infantry training tactics and procedures (TTPs) to support the execution of Warrior-related programs (Land Warrior and Ground Soldier System). The candidate will have experience and knowledge of the Army's System Approach to Training (SAT) and associated regulation, processes, and products. The position will consist of assisting in the development of training products to support these activities, and will work closely with the program manager and instructional designer. The candidate must be familiar with Army training and key organizations/processes. The ideal candidate will be a reitired Infantry Officer transitioning out of Army who has good reputation and right skill sets. The position could grow into a PM role or instructional designer. The candidate must understand the Army acquisition process. The candidate must have an ability to interface with customers. The candidate must be visionary. The candidate must be able to take ideas and run with them and "connect the dots" to promote new technologies/products. The candidate must know the Army dismount landscape and can weave their way through the politics (business savvy). The candidate must be able to mentor junior staff members. The candidate must understand the Army training continuum. The candidate must have a demonstrated ability to adapt to a changing environment and be a team player. Experience with Warrior, GSS, Stryker, or FCS training programs is strongly desired. Infantry and Maneuver Knowledge: Knowledge of what they do, how do they do it, and how they are taught. Infantry Training Experience: Experience in the processes required to train and how is it accomplished. Knowledge of what products are required, when they are required, and who are they approved by. Knowledge of what the products need to look like. Project Management Experience: Know how to schedule and maintain a budgeted effort. Know what is needed to be done to ensure proper execution of responsible efforts. Understanding of TRADOC and Associated Command (ARCIC, ATEC, PEO STRI, etc.): Understand how the different organizations interact and work against/with each other towards the definition, execution and acceptance of a program and its products. Acquisition Process Knowledge: Know how money is supplied and passed through the various government organizations. Know who are the decision makers in which chains that decide what gets funded and when. Know who decides that an effort is properly executed and the subcontractor did a satisfactory job. Defense Contractor Process Knowledge: Know what does it mean to work for a defense contractor vs. a government position and what is different. Know how to deal with those differences. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/13/2008   Manufacturing Engineer This position is for a Manufacturing Engineer on a large development program transitioning into high volume production. The candidate will serve as a focal point to the design team through New Product Introduction (NPI) and into full rate production of software definable radios in multiple different form factors to the US government. They will assume a leadership role during the NPI phase, and then continue to support the project during the production phase. This is a large complex project with over $4B worth of potential follow-on business. The candidate must work as an individual technical contributor as well as leading small task groups. Canidate must also plan and execute project tasks, develop manufacturing plans and strategies for specific products and processes, take initiative in proposing ideas/soliciting input/optimizing solutions, and actively interface with Electrical, Software, System, and Test Engineers on related technical problems. It is strongly desired that the candidate be able to provide direction when required, research and analyze data to determine feasibility of design or process for production, apply technical concepts to specific tasks, identify design alternatives to enhance producibility, support continuous improvement efforts, and be aware of business objectives.The candidate must have knowledge of Printed Wiring Board/Printed Wiring Assembly mechanical design aspects, as well as knowledge of processes involved in manufacturing Printed Wiring Assemblies. They must also be capable of mapping existing and generating new process flows. It is strongly desired that the candidate have exposure to DTUPC cost models, DFM/DFA tools related to electronics manufacturing, risk assessment, tooling design, and CAD software. They should have the ability to interface with contract manufacturers, as well as generate/status/maintain build documentation. Knowledge of make/buy analysis, advanced packaging technologies, and generating schedules is a plus. The candidate must have a BS Degree in a technical field related to manufacturing 5 years of demonstrated results, or equivalent experience involving criteria above. The candidate must have the ability to obtain a DoD Secret level security clearance. Applicant must be able to pass an extended background investigation (EBI) for this position. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/05/2008  Safety Engineer Safety Engineer Responsibilities: • Analyzing problems and identifying alternative solutions. • Implementing recommendations in support of Company safety goals and objectives. • Communicating and working in cross-functional teams. • Precise and effective presentations of findings to critical audiences. • Creating clear and concise reports as a result of safety and human factors checklists and analysis. • Travel up to 10% Required skills: • Knowledge and skills in analyses techniques necessary to support safety and human factors analysis such as: hazard analysis, task analysis, human engineering design analysis, fault tree analysis, risk assessments/resolution, hazardous materials identification and mishap investigations. • Strong oral and written communication skills • Knowledge and use of all Microsoft tools such as Word, Excel, and Access database. • Familiarity with Military and their equivalent Industry Standards such as: MIL-STD-882, MIL-STD-1472, MIL-STD-1629, MIL-HDBK-454, MIL-HDBK-46855, and MIL-HDBK-759. • BS degree required • System Safety and /or Human Factors Engineering experience preferred. Company Name:  Formailized Apply for this Position   08/02/2008  Machinist, CNC CNC MACHINIST & PROGRAMMER Prototype / tooling machinist capable of running and setting up CNCs to machine precision RF microwave components. Capable of running any conventional machines. Work with close tolerances.Prototype / tooling machinist w/ min 5 years experience. Vocational school or High School or GED equivalent. Read and understand engineering drawings and specifications. Perform own set-ups. Mastercam X programming and editing exp. a must. Exp with Fadals w/ 4-axis. Own and knowledgeable in inspection tools. Company Name:  General Dynamics C4 Systems Apply for this Position   08/02/2008   2152 Expeditor THIS POSITION IS OPEN IN KILGORE, TEXAS The purpose of this job is to ensure the orderly and timely flow of component parts, subassemblies, and assemblies through each department in the group (Panel, Paint, Final Assembly, and Crate Departments) in sufficient time to meet the requirements of the production schedule and fill in as required for any leadman • Prepares a variety of letters, memorandums and reports in an accurate and efficient fashion. • Proofreads typed material. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School graduate or equivalent preferred. • At least one year with the company with a broad range of experience in the manufacturing process and familiarity with the work order system, prints, computers, and terminals. • Complies with SATCOM and departmental policies, procedures and regulations. • Attends Safety Meetings. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. • Reading comprehension skills to understand work orders, written instructions. • Math skills to perform basic calculations. • Transcription skills to relay information in report form to appropriate personnel. • Oral communication skills to exchange information with co-workers, supervisors or other personnel. • Spatial visualization to determine final product character from flat part prints. • Computer literacy to facilitate research of parts in the work order system and parts menu. • Ability to work under time pressure. • Ability to respond quickly and calmly to emergency situations. • Ability to train lower level employees in job related processes in his/her particular field. • Ability to lift 30 pounds without lifting equipment or co-worker's assistance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/01/2008   2143 Welder II ALUM Under general supervision, welds ferrous and/or nonferrous metals using MIG and TIG. Performs all work in adherence to safety and quality procedures. Maintains clean work area. Must be capable of passing welding certification tests and blueprint reading of welding symbols. Essential Functions: • Performs simple, routine, and repetitive tasks using standard welding procedures, tools, materials, machines, and equipment. • Grinds, bevels, and welds; chips weld slag. • Performs work area cleanup and safety related duties. Non-essential Functions: • Operates a motor vehicle. • Operates a forklift. • Performs other related duties as assigned by management. • Various wrenches (e.g., hammer, pipe, combination, adjustable) • Hammers (#2 to #18) • Come-a-longs • Chains, slings, and boomers • Brooms • Welding power supply • Wire Feeders • Cutting torch POWER TOOLS • Drills • Impacts • Ratchets • Grinders • Needle scaler • Sander • Rolls • Overhead crane • Plate magnets USER-MOVED EQUIP. • Wheelbarrows • Dollies • Pallet jack Company Name:  General Dynamics C4 Systems Apply for this Position   07/31/2008    2135 Stockroom Clerk I THIS POSITION IS OPEN IN KILGORE, TEXAS Perform routine Stock Clerk duties related to stocking, pulling parts, packaging, and other tasks required for stockroom maintenance and security. Essential Functions: • Pulls and packs antenna parts for shipment or list for manufacturing. • Stock parts in the warehouse. • Performs cycle counts as required. • Maintains and cleans area. • Performs other related duties assigned by management. Use fork truck, hand truck, pallet truck, trash compactor, power stacker, wire roller, banding tool, foam gun, electronic scale, hammer, saw, screw driver, tape measure, utility knife, copy machine, computer, tape dispenser, ladder, broom. Company vehicle if need arises. • All parts for antenna installation and/or subassembly in house arrive on time, securely packaged, and in the correct quantities. • Complies with SATCOM and departmental policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School Graduate or equivalent. • Warehouse experience preferred. Strong interpersonal skills to work with manufacturing, accounting, and engineering program management. • Must have good communication, math, reading and comprehension skills. • Must be able to write legibly. • Ability to measure dimensions and pull items by part number and description. • Blueprint reading would be helpful. • Must be detail oriented, punctual, and safety conscious   Company Name:  General Dynamics C4 Systems Apply for this Position   07/29/2008     Maximo Managing Consultants - Interview with IBM Join a Leader. Consult with Us. IBM Global Business Services is looking for talented professionals to grow our consulting team. Join the world's largest consulting organization with a unique position at the intersection of business and technology. You’ll become part of an award winning-team, deliver innovative solutions that translate into real business value for global business leaders, and take advantage of the opportunities only a leader like IBM can offer. Meet with us at our open house: Wednesday, August 13, 2008 from 10am-4pm Ritz-Carlton Pentagon City 1250 South Hayes Street Arlington, VA 22202 Directions Only: (703) 415-5000 Event details and advance registration: www.IBMexpo.com US Citizenship is required for some positions. Opportunities exist for both security-cleared and non-cleared professionals. Job Details Min. 4 Yrs. employment in a consulting firm w/consulting responsibilities. At least 4 Yrs. delivery exp. in large & complex fleet environments, supply chain & asset mgmt projects in recent yrs. Demonstrated technology/process leadership exp. in at least 2 Maximo Transportation/Fleet full lifecycle implementation w/Maximo version 5.x (6.x preferred). Consulting & client mgmt exp. w/Director level & above. Maximo Transportation/Fleet Solution Consultant is directly responsible for successful delivery of asset mgmt/supply chain process transformation, change mgmt & technology initiatives. Designs, builds & tests the Maximo Fleet module, provides hands-on leadership, direction, & mentoring to the team, manage client relationships & exp. w/two or more utilities accounts. Preferred Candidates should have Maximo MRO Certification (Ver. 6 desired), exp. in at least 3 full lifecycle asset mgmt/supply chain projects, exp. w/integration into SAP, exp. in the utilities &/or transportation industries, be a subject matter expert in Transportation/Fleet processes, asset mgmt processes & operations. Hands on work exp. & a strong understanding of the Transportation/Fleet solution & work processes. Required - At least 1 year experience in Maximo - Readiness to travel Up to 75%; traveling 5 days a week, home on weekends - U.S. citizenship required - English: Fluent Preferred - Bachelor's Degree - Certified in Maximo MRO Due to explosive growth, we have exceptional nationwide opportunities to join our thriving organization of more than 80,000 consultants and professional staff worldwide. Whether you’re launching your career or making a strategic, we have the right opportunity for you. IBM is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.   Company Name:  General Dynamics C4 Systems Apply for this Position   07/24/2008    Environmental Engineer BS in Safety, Chemical, Environmental Engineering, or science discipline or equivalent, plus 1-3 yrs directly related experience; or MS degree in similar discipline PE, ASP, IHIT, CSP, CIH or other professional registration preferred Design and/or direct environmental or safety process and program improvements Investigate employee/building safety related accidents/events Perform environmental safety inspections of work areas to determine if regulations & standards are being observed Disseminate information concerning environmental or safety policies, procedures & standards Review new & modified production equipment prior to use to ensure compliance with applicable EHS regulations Approve EHS related equipment for use in the work areas Prepare & utilize protocols & programs of self-inspection to assure compliance with regulatory & other requirements Work area supervisors Insurance carriers Good understanding of EHS codes, regulations & applications Good understanding of EHS policies & procedures Working knowledge of hazardous chemicals and/or gases, industrial processes and EHS risk management Ability to participate on cross-functional teams Good analytical & problem solving skills Good computer skills Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance.   Company Name:  General Dynamics C4 Systems Apply for this Position   07/18/2008    2142 Machine Operator I Under close supervision, operates a machine and performs other duties in the fabrication of detail parts. Essential Functions: • Performs fabrication of detail parts enabling other departments to build assemblies. • Performs own machine setup and drawing interpretation. • Moves material from yard to machine. • Performs area cleanup and safety related duties. Non-essential Functions: • Operates an overhead crane. • Performs other related duties as assigned by management. • Complies with all General Dynamics SATCOM Technologies policies, procedures and regulations. • Maintains quality output while meeting department production requirements. • Works during scheduled hours. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. Machines and Equipment Involved: HAND TOOLS • Various wrenches (e.g. pipe, combination, adjustable) • Hammers (2# to 18#) • Shear • Ironworker • Punch • Hand plasma • Cutting torch • Tape • Drills • Saw (horizontal) POWER TOOLS • Drill press • Grinders, sanders USER-MOVED MOBILE EQUIPMENT • Wheelbarrows • Dollies • Pallet jack USER-POWERED EQUIPMENT • Forklift • Overhead crane   Company Name:  General Dynamics C4 Systems Apply for this Position   07/11/2008     2143 Welder/Fitter I THIS POSITION IS IN KILGORE, TEXAS MUST BE WILLING TO WORK A NIGHT SHIFT, IF NEEDED. Job Summary: Under close supervision, interprets drawings, sketches, and/or preliminary designs. Assembly of detail parts into structures in such a manner that the welders can follow up. Welds ferrous and/or nonferrous metals using MIG and TIG. Must pass welding and fitting certification tests. Essential Functions: • Performs tasks of considerable variety and complexity, which require a basic knowledge of fitting techniques, materials, tools, machines and equipment. • Grinds, bevels, and welds; chips weld slag. • Works from engineering drawings, rough sketches, verbal instructions, etc. • Inspects completed work for performance to specification. • Performs work area cleanup and safety related duties. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce MUST BE ABLE TO PASS WELDING TEST MUST BE WILLING TO WORK A NIGHT SHIFT, IF NEEDED. Experience and Education • High School graduate or equivalent preferred. • Two to five years of experience preferred in welding. Knowledge, Skills, and Abilities • Must be able to pass welding and fitting tests. • Reading comprehension skills to understand work orders or written instructions. • Math skills to perform basic calculations. • Oral communication skills to exchange information with co-workers and supervisor. • Hand eye coordination, depth perception. • Ability to see things clearly that are beyond arm’s reach. • Ability to see small detail. • Ability to climb ladder. • Ability to maintain balance on catwalks and narrow work spaces. • Ability to stand for long periods of time. • Ability to work in awkward positions. • Ability to set up, operate, and maintain specialized tooling and fixtures. • Interpersonal skills to cooperate and work effectively with others.   Company Name: General Dynamics C4 Systems Apply for this Position   07/11/2008     2155 Material Coordinator THIS POSITION IS OPEN IN KILGORE, TEXAS To support the Depot through Mechanical assembly, inventory control and Shipping/Receiving tasks. Essential Functions: • Backup to Government Functional Property Administrator and Property Record Custodian. • Operate in the capacity of the Property Physical Custodian within Department. • Generate requisitions with quantity and need dates designed to meet the refurbishment schedule. • Maintain Purchase Part lead times. • Notify FPA/PRC of inbound purchase part dates that conflict with refurbishment plan and resolve conflicts to meet Customer demand. • Maintain integration test data. • Maintain Depot stock room inventory • Issue materials from Depot stock room • Perform Cycle Counts as required. • Coordinate vendor technical questions with Project Engineers for resolution. • Internet sourcing as required. • Other duties as assigned by Management. • Determine problems in advance, document repeat problems and provide necessary facts to allow The Company to rectify problems and prevent them in the future. • Complies with Company departmental policies, procedures and regulations. • Works during scheduled hours. • Maintain quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School Graduate or equivalent preferred. • Computer literate in MS Excel, MS Word, ERP software Knowledge, Skills, and Abilities • Computer proficiency. • Good communication skills. • User powered vehicle proficiency. • Ability to work in tight spaces.   Company Name: General Dynamics C4 Systems Apply for this Position   07/08/2008   2162 Painter I Essential Functions: • Prepares surfaces and applies coatings to details and assemblies. • Conducts daily cleanup of equipment and work area to fulfill proper work area painting environment requirements. • Assists in the procurement of needed supplies and materials. • Performs safety-related duties and other duties as assigned by supervisor. Machines and Equipment Involved: • Air spray-painting rigs • Air make-up systems • Airless spray-painting rigs • Viscosity cup • Dry Booths • Paint mixing equipment • Blowers • Drills • Sanders/blasters • Riggers • Cranes • Forklift • Complies with all Company policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce Experience and Education • High school graduate or equivalent preferred. • Two to three years of experience industrial and metal finishing process required. Knowledge, Skills, and Abilities • Knowledge and understanding of Company paint specifications for required finishes. • Knowledge of dry booth painting. • Knowledge of proper surface preparation prior to painting. • Knowledge of painting equipment used. • Interpersonal skills to cooperate and work effectively with others. • Ability to understand complex drawings, work orders and BOMs. • Ability to evaluate work conditions and quality of work produced. • Ability to work in tight spaces.   Company Name: General Dynamics C4 Systems Apply for this Position   07/08/2008   2172 Documentation Tech I Printing and distribution of Engineering documentation. Creating and revising Technical documentation. Organizing and maintaining the print room and Engineering library. • Maintenance, reproduction, binding, filing and distribution of documentation. • Route engineering documentation daily as required. • Maintain documentation’s equipment and supplies. • Follow direction of Documentation Supervisor. • Creating and revising Technical Documentation per procedures. • Organizing and maintaining the Engineering Library per procedures. • Assist other Documentation Staff and fill in for them in their absence. • Perform other duties as assigned by management • Training other staff. • Assist with Engineering changes. • Maintain equipment. • Work under the immediate direction of the Documentation Supervisor. • Properly use Company facilities, equipment and supplies. • Comply with Company and departmental policies, procedures and regulations. • Use safe conduct. • Work during scheduled hours. • Practice neatness. • Maintain quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High school graduate or equivalent. • College level training in Technical Writing or a minimum of one year of related work experience. Knowledge, Skills, and Abilities • Computer proficiency. • Good communication skills.   Company Name: General Dynamics C4 Systems Apply for this Position   07/08/2008   2138 Radial Assembler I Using detailed instructions, assembles and assists other employees in the production of high-quality reflector radials and other components built in the work center. Essential Functions: • Using panel department tools, assembles high-quality radial components. • Procures needed parts and materials, and moves them to work center. • Rolls form tees to correct contour. • Using inspection tools, evaluates quality of work completed. • Moves completed work to the next work center. • Assists in the training of lower level assemblers. • Assists with other work centers within Dept. 2138 • Performs work area cleanup and safety related duties. • Performs other related duties as assigned by management. • Complies with SATCOM and departmental policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School Graduate or equivalent preferred. • Computer skills preferred. • Reading comprehension skills to understand work orders and written instructions. • Math skills to perform basic calculations. • Oral communication skills to exchange information with co-workers and supervisor. • Interpersonal skills to cooperate and work effectively with others Must be familiar with the following tools and equipment: • Gluing tools • Radial inspection tools • Wrenches • Tape Measure • Riveters • Drills • Metal cutting tools • Dollies • Grinders • Pallet Jack • Sanders • Forklift Company Name: General Dynamics C4 Systems Apply for this Position   07/08/2008  2145 NIGHT Machinist I Under general supervision, sets up and operates one or more simple types of machines, such as drilling and grinders. Fabricates parts, tools, jigs, and fixtures using simple blueprints and drawings. Essential Functions: • Performs repetitive operations on equipment such as drills, lathes and mills. • Performs own setups. • Performs work area cleanup and safety related duties. • Performs miscellaneous tasks that require manually moving materials, details, assemblies, tools, and equipment and using hand tools and power tools. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School diploma or equivalent preferred. • Three years of experience preferred in machining. Knowledge, Skills, and Abilities • Good knowledge of machining practices. • Reading comprehension skills to understand work orders, written instructions, and drawings. • Mathematical skills to perform basic calculations. • Oral communication skills to exchange information with co-workers, supervisor and/or manager. • Hand-eye coordination, depth perception. • Ability to train lower level employees. • Ability to work under time pressure. • Ability to see small detail. • Ability to stand for long periods of time. Company Name:  General Dynamics C4 Systems Apply for this Position   07/08/2008  2138 NIGHT CNC WaterJet Operator Job Summary: Works from engineering drawings and/or sketches to fabricate complex parts and components. Utilizes CNC equipment to produce cost effective and accurate components. Checks work to conformity per Company workmanship criteria and input requirements. Assists with the training of other machinists in the operation of CNC equipment. • Fabricates complex parts and components from engineering drawings and/or sketches as needed. • Inspect the work in process being produced on the CNC equipment. • Take quantity accurately in Shoptrac. • Performs setups on CNC water jet, stretch form machine • Performs other related duties as assigned by management. • Maintaining positive lines of communication with Supervisor regarding projects in work, problems incurred, etc. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School Graduate or equivalent. • Must demonstrate good mechanical aptitude and be able to carry out temporary, emergency repairs on complex machinery if the need arises. • Must be able to read and interpret parts drawings and assembly drawings. • Must be knowledgeable of standard measuring techniques and machining limits and tolerances. • Must understand properties of materials, appropriate cutting tools, and use of mechanical hand and simple power tools. Must be able to operate at least one of the machines listed below: • CNC water jet • Stretch form machine Must be familiar with the following: • Hand tools • Tool grinder • Band saw • Drill press • Electric hand tools • Keeps machines, tools and entire shop area clean. • Timely, professional completion of all tasks assigned to CNC work center. • Knowledge of and compliance with Company and departmental policies and procedures. Company Name:  General Dynamics C4 Systems Apply for this Position   06/12/2008   ONIR (Overhead Non-imaging Infrared) Scientist ONIR (Overhead Non-imaging Infrared) Scientist What You'll Do Work in a research and development environment, developing new exploitation algorithms for ONIR datasets What You'll Need Bachelors degree in Physics or Engineering is strongly preferred, with 2 or more years of related experience. Advanced degree is preferred. Knowledge of multi-spectral and hyper-spectral data processing Experience with ENVI toolset and IDL programming language Must have ACTIVE TS/SCI clearance In addition to the typical educational and experience requirements, a demonstrated capability to adequately perform the essential functions and responsibilities of the position and exhibit the skills and competencies of the grade level will be considered. Each higher level degree, i.e. Bachelor's or Master´s degree may substitute for two years of experience. Related experience may be considered in lieu of education.   Company Name:  Ball Aerospace & Technologies Corp. Apply for this Position   06/04/2008   Warehouse Associate Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for a Warehouse Associate. This position will be responsible for shipping and receiving and pulling orders. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V This position requires a reliable individual with a strong attention to detail. Experience driving a forklift is a plus! Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   05/13/2008  Operations Manager - Capital RESPONSIBILITIES Ensure that all Safety and Operating Rules are adhered to at all construction work-site locations under position jurisdiction through daily on-site monitoring of projects and proximate train operations. Project Flag assignments consistent with contractual requirements and sufficient to assure the safety of the site in the most economical manner practicable. Plan and order Flag assignments to fulfill contractual obligations and ensure work site safety and efficiency. Review project requirements and schedules to minimize impact on daily train operations. Maintain active liaison with other departments to assure timely coordination of project status, support services required, operational impacts and schedule integrity. Must be able to work with other Metro-North departments, outside agencies and private contractors. Ensure that functions requiring flagging support are covered through coordination of vendor daily activities and confirmation of on-sit availability of assigned Flag positions. Supervise and coordinate activities with Operations Managers - Capital Projects to assure proper coverage of all project sites under jurisdiction. Verify Flag assignment payroll documents to assure proper maintenance of cost controls through budgetary and contractual compliance. Prepare and review force account estimates and various budget reports/analysis REQUIRED QUALIFICATIONS Ability to assess and correct problems in stressful situations with tight time constraints. Strong leadership and interpersonal skills to facilitate and execute coordinated inter-departmental service delivery. Ability to communicate effectively with all levels of the organization and with outside agencies. Ability to manage an extensive work force and develop timely solutions to operating problems. Ability to work effectively with various Operating Departments, contractors, personnel, as well as with outside agencies. PREFERRED QUALIFICATIONS Minimum three(3) years of experience in a Transportation/Operations capacity. One (1) year of experience managing a diverse work force in an Operations or Service delivery function. Must be qualified on the Metro-North Railroad or a comparable commuter railroad Rules of the Operating Department and Air Brake and Train Handling Instructions. If from another commuter rail, the successful candidate must be qualified on Metro-North Rules of the Operating Department and Air Brake and Train Handling instructions within two (2) months from date of hire. Strong oral and written communications skills. Ability to work nights and weekends, and to be on call seven days a week when required. REQUIRED EDUCATION/EXPERIENCE Minimum three (3) years of experience in Operations, Logistics, or Project/Construction Management capacity. Must be qualified on the Metro-North Railroad or a comparable commuter railroad Rules of the Operating Department and Roadway Worker Safety Rules. If not qualified, the successful candidate must be qualified on the Metro-North Rules within six months from date of hire. Must be qualified on the physical characteristics of the assigned line. If not qualified, the successful candidate must be qualified on the physical characteristics of the assigned line within six months of date of hire. Must have a valid driver's license... Company Name: MTA Metro-North Railroad Apply for this Position   04/04/2008   Production Assembler Summary: Performs repetitive bench or line assembly operations to mass-produce products. Essential Duties and Responsibilities include the following. Other duties may be assigned. Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Tends machines, such as arbor presses or riveting machine, to perform force fitting or fastening operations on assembly line. Works at different work stations as production needs require. Works on line where tasks vary as different model of same article moves along line. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competency: To perform the job successfully, an individual should demonstrate the following competencies :Oral Communication - Listens and gets clarification. Quality Management - Demonstrates accuracy and thoroughness. Organizational Support - Follows policies and procedures. Attendance/Punctuality - Is consistently at work and on time. Quality - Monitors own work to ensure quality. Quantity - Meets productivity standards. Safety and Security - Observes safety and security procedures. Rivet Machine Exp., Epoxy Machine Exp., Blue Print knowledge, Measurement (Tape or Calipers) Exp... Company Name:  General Dynamics C4 Systems Apply for this Position   04/03/2008   SDR HW Platform Designer The Software Defined Radio Section seeks experienced Digital Designer for implementation of advanced platform design and implementation. The candidate will design and implement complex digital communications and signal processing functions, participate in develeopment of ROMS adn bids associated with new business, interface with upper level management and customers on a technical basis.BSEE is preferred and at least 3-5 years demonstrated results in the design of digital and microprocessor circuitry for fielded products. The candidate must have practical experience with digital, CPLD and FPGA design and analysis tools. Secret Clearance not required but highly desired. Altera experience a strong plus. Applicant must be capable of obtaining a US Security Clearance. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance.  Company Name:  General Dynamics C4 Systems Apply for this Position   04/02/2008   Technical Instructor (Trainer) Present formal instruction to soldiers at the U.S. Army Signal School to qualify them in the duties required to perform installation, operation, and maintenance, supervision and management of Multi-Channel Transmission Systems Equipment and associated Peripheral devices. Conduct structured training courses using Tri-Tac Single Shelter Switch assemblages, Satellite Systems, TROPO (AN/TRC-170, HCLOS, Line of Site.(LOS) transmission assemblages, and laboratory training aids, training simulator devices, CBT technology, and associated training materials in support of the Transmission Systems Training. Maintain current academic and counseling records on all students enrolled in the course creating an audit trail in support of creating accepted minimum academic standards. Prepare and furnish required documents (attendance rosters, exam scores and deficiency reports) on student’s progress along with current course status to the Student Administration Section for further dissemination and processing. Test continuously for accuracy in lesson material, student guides and technical manuals, providing corrective input for a product that is consistent with contract specifications. Recommend improvements in course material and training equipment; participate in developing new course material when technology changes or course material changes. Enter official published modifications to technical manuals and update company prepared student guides to reflect changes, keeping those materials available to the students as the most current and in concurrence with information presented during the conference periods. A minimum of one year in formal course presentation is required and hands-on experience in the operation and maintenance of Multi-Channel Transmission Systems.Typically requires minimum of 1 - 2 years experience. ITC Certification highly sought. Associates degree in a technical or related field of study, or equivalent work knowledge and experience with Tactical Single Shelter Switch assemblages, Satellite Systems, TROPO (AN/TRC-170, HCLOS, Line of Site.(LOS) transmission assemblages. network planning, implementation or management is desired but not required. 4-6 years experience in working with military tactical networks is desired but not required. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   04/02/2008   Material Kitting/Expediting Integrated Defense Systems Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is expanding its Southern York County location. We have an immediate need for an Expeditor. We are seeking an experienced Expeditor to work with the purchasing and materials departments. This position will require material kitting and the distribution of materials to the production floor. This individual will verify parts and inventory amounts against manufacturing orders. The expeditor will be responsible for insuring that material and parts are properly identified and packaged to insure inventory accuracy. The person in this position will verify shortages and contact vendors to expedite the materials. This position is with General Dynamics SATCOM Technologies, Inc.,(IDSI) which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Candidate should have a High School Diploma or equivalent. Strong attention to detail is important in this position, while experience with electronic parts is a plus. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   04/02/2008   Planning/Purchasing Supervisor Job Summary: Supervises the Tactical Antenna Production Planning and Purchasing group. Coordinates with Engineering, Project Management, Production and Shipping to schedule all work centers and production delays. Supervises activities in assigned work groups to ensue that requisitioned materials are sourced, with suppliers that meet our performance standards at a competitive price.Essential Functions: 1. Formulates, distributes, and enforces internal departmental guidelines and procedures. 2. Helps to improve profitability by cost reduction purchases, and timely recreipt of materials. 3. Pools purchases and negotiates annual commodity agreements, and includes other locations where appropriate. 4. Keeps department managers informed, as requested material pricing and availability. 5. Promotes quality, safety, and productivitity. 6. Conducts performance appraisals of Planners, Buyers, Expeditors, and Clerks. 7. Trains co-workers as required. 8. Interact with all dept. at all levels. 9. Performs other related duties as assigned by management. Company Name:  General Dynamics C4 Systems Apply for this Position   04/01/2008   Scientific Program Manager As a government contractor, CMI successfully supports the USAF in biotechnology and scientific research. We are seeking an experienced Scientific Program Manager to support the US Air Force Research Laboratory (AFRL) agency. AFRL's mission is leading the discovery, development and integration of affordable warfighting technologies for America's forces. AFRL leads a worldwide government, industry and academia partnership in the discovery, development and delivery of a wide range of revolutionary technology. Job Responsibilities * Provide management oversight of all CMI contracts, subcontracts, equipment & supply * Track, forecast and manage government funding and budgets allocated to CMI * Act as main POC for all government customers, including involvement in all govt meetings * Management and leadership support for all CMI scientific team members on project * Participate in CMI Corporate Leadership activities * Seek out additional business opportunities Job Qualifications * Degree in Science or Engineering discipline – preferably Biomedical Science or Bioengineering * 5+ yrs experience managing contracts and subcontracts * 5+ yrs budget tracking and forecasting government funds * 3+ yrs technical writing experience, exp with SOW, RFIs, RFPs, contract mods, etc * 3+ yrs experience managing scientific personnel teams and projects - A MUST! * Possess experience with government procurement process Company Name:  Conceptual MindWorks, Inc. Apply for this Position   04/01/2008   Expeditor - 2137 The purpose of this job is to ensure the orderly and timely flow of component parts, subassemblies, and assemblies through each department in the group (Panel, Paint, Final Assembly, and Crate Departments) in sufficient time to meet the requirements of the production schedule and fill in as required for any leadman • Prepares a variety of letters, memorandums and reports in an accurate and efficient fashion. • Proofreads typed material. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School graduate or equivalent preferred. • At least one year with the company with a broad range of experience in the manufacturing process and familiarity with the work order system, prints, computers, and terminals. • Complies with SATCOM and departmental policies, procedures and regulations. • Attends Safety Meetings. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. • Reading comprehension skills to understand work orders, written instructions. • Math skills to perform basic calculations. • Transcription skills to relay information in report form to appropriate personnel. • Oral communication skills to exchange information with co-workers, supervisors or other personnel. • Spatial visualization to determine final product character from flat part prints. • Computer literacy to facilitate research of parts in the work order system and parts menu. • Ability to work under time pressure. • Ability to respond quickly and calmly to emergency situations. • Ability to train lower level employees in job related processes in his/her particular field. • Ability to lift 30 pounds without lifting equipment or co-worker's assistance. Company Name:  General Dynamics C4 Systems Apply for this Position   03/19/2008   Pricing Analyst The Pricing Analyst will: * Develop competitive pricing strategies utilizing Earned Value Management (EVM) methodologies in supports of RFP solicitation * Work with Business unit Proposal Managers and Program Managers to obtain pricing & cost data for proposal efforts and provide decision support analysis on bids * Produce compliant cost/price proposals, including cost models/templates, formats and pricing rationale in accordance with solicitation instructions, corporate policies and CAS/FAR * Coordinate with proposal managers/technical staff to ensure required cost data is thorough, accurate and submitted on schedule * Analyze data for use in the development of cost estimates and proposals and develop financial models and rate analyses to aid in pricing accuracy * Conduct analysis regarding Labor, Material, Equipment, Subcontracts and other Direct Cost requirements * Interface/coordinate with subcontractors to ensure proposals received are reasonable, realistic, compliant with RFP requirements and submitted on time * Conduct Final Cost Review with senior management prior to submission of proposals * Maintain a Clarifications & Deficiencies (CR & DR) rating of 96% or better. * Interface with DCAA and other government agencies regarding proposal audits/reviews Key activities include working under strict deadlines with ARINC personnel at all levels to find or develop necessary data, creating pricing and financial reports that meet specified proposal request criteria, and analyzing those reports for accuracy, completeness, and potential risks or problems. Local candidates preferred. Please include salary requirements. Some travel involved in the U.S. Company Name:  ARINC Apply for this Position   03/13/2008   Lt Colonels/Colonels/Generals A subject matter expert in the area of military training, Training Aids Devices, Simulators, and Simulations and the Distributed Battle Simulation Program. Performs duties as a special staff officer to the commander of Enhanced Separate Brigades and Divisions. Serves as a mentor, trainer, and confidant to the commander and his or her staff. Recommends training, strategies, methodologies, develops annual training plans, and advises the commander on the use and integration of TADSS in order to maximize time constraints during compressed training cycles. Supervises and directs execution of the Distributed Battle Simulation Program (DBSP) training support programs and objectives for technical support training within Battalion, Brigade, and Division size organizations. Coordinates the daily activities of subordinate COTAs, TADSS Facilitators, and Technical Team assigned within the division. Assesses unit training and provide feedback to the division commander. Serves as central point of contact devoted to maximizing the initiatives and support activities provided by the DBSP. Assists unit commanders in developing Yearly Training Plans. Serves as Special Staff Officer to the Commander. Provides feedback regarding the status of training within the division. Coordinates with the state agencies (POTO, STARC, and TAG) to facilitate communication between NGB and state ARNG assets. Coordinates the acquisition and implementation of Training Support Packages needed to support the Division Commander's training plan. Ensures maximum effort and benefit are obtained from the local TSBn commander. Serves as the unit continuity during major staff reorganizations. Develops a process to capture lessons learned from major training exercises and establish internal training programs to maximize training based on lessons learned. Plans, coordinates, and executes Battle Staff Training ensuring Military Decision Making Processes training is provided to unit staff officers as required. Attends annual training planning conferences, semi-annual training briefings, and quarterly training briefings. Plans, coordinates, and executes Simulation Exercises in support to the commander's Yearly Training Plan. Submits monthly status reports outlining accomplishments, upcoming events, TADSS utilization, and TADSS status within the division and subordinate units. Bachelor's degree from an accredited college. Prefer computer science, information systems, mathematics or engineering disciplines. Requires 8-10 years directly related experience supporting military operations, or equivalent combination of education, training or military experience. Advanced knowledge of the principles, methods, processes, and applicable regulations involved in supporting military operations; Advanced knowledge of relevant hardware, software, and other equipment as assigned; Ability to serve as a technical team or task lead; Knowledge and expertise in developing homeland defense exercise support scenarios; Two or more years working with and using Computer Assisted Training exercises. Company Name:  General Dynamics Information Techology Apply for this Position   03/05/2008   Proposal Writer Write / edit proposal sections, lead volumes, and incorporate win themes Serve as primary point of contact for information; synthesize text / ideas from multiple authors, programs/project managers, and subject matter experts Coordinates with the project and pricing staff to ensure that all of the information needed to prepare the cost Proposal is available and input is received on time Conducts strategy sessions to develop win strategies and themes, identify and assess competitors, and develop client hot buttons Occasionally participates on external capture team as a company representative Develops corporate/technical boilerplate and maintains the boilerplate/proposal library Attends win/loss debriefings and assists in developing lessons learned Edit for consistency (one voice), clarity, grammar, and syntax, and compliance with customer requirements Analyze solicitation requirements and RFP/RFQ/RFI specifications, writes original text, and validate compliance Work with Capture Manager and line management in advance of the solicitation release to document/capture the customers' and evaluation board's needs and objectives Respond rapidly to RFP requirements and implement required changes to proposal Develop and maintain client relationships and profiles and represent the company at local, national and international meetings pertinent to Business Development Prepare presentations, assist with storyboards, capture plans and white papers to support business development activities Ensure compliance, quality, and timeliness of the entire RFP response Support development of marketing materials.. Company Name:  Analytical Graphics, Inc. Apply for this Position   02/04/2008   Associate Provost, SSL Specific responsibilities include: - Coordinating with the academic programs and identifying program needs for curriculum growth and enhancement: - Supporting curriculum development, information architecture, faculty training and development, and laboratory development and support at the undergraduate and graduate levels; - Identifying grant opportunities, completing application packets, administering funds, supervising grant activities; soliciting external contracts and administering them; - Preparing and overseeing the SSL operating budget; directing preparation of all marketing materials to promote activities such as information assurance program dissemination; and planning and coordinating conferences, colloquia, workshops and webcasts on information assurance security topics; and - Performing other job-related duties as assigned. The Securities Studies Laboratory provides a conduit for exchanging state of the art teaching and learning environments with information assurance and security content. Its primary goal is to teach information technology professionals at the graduate and undergraduate levels using asynchronous distance learning media. The position requires a PhD, DSc, DM, or other terminal degree with relevant administrative experience in information technology and information assurance or homeland security. The successful candidate will have a mature network of professional contacts within industry and government and either a record of success in securing external funds or strong promise of establishing such a record. An active U.S. security clearance, or the ability to gain a clearance, is desirable. Teaching experience at the undergraduate or graduate level and familiarity with the federal Centers of Academic Excellence in Information Assurance are also required. Position is available immediately. Continuous recruitment until filled. All submissions must include a cover letter and resume... Company Name: University of Maryland University College Apply for this Position   01/16/2008    U.S. GAO Chief Technologist The Chief Technologist is an expert advisor and chief consultant to the Government Accountability Office (GAO), Congress and other federal agencies and government programs on cutting-edge technologies, key highly-specialized national and international systems, engineering policies, best practices, and original research studies in the fields of engineering and computer and information technology, to ensure efficient, effective, and economical use of technology in government programs. The incumbent provides leadership and expertise in engineering, computer, and information technology on the technical accuracy and adequacy of GAO audits and evaluations of federal programs that acquire and use every type of technology...   Company Name: JDG Associates, Ltd Apply for this Position   11/26/2007  Configuration Management Analyst As a Configuration Management Analyst you will become an integral part of our growing organization. As a member of the KeyLogic Team, you will be able to expand your knowledge, work with top industry experts and be a valued and recognized employee. The position requires an ability to take initiative and a willingness to work in a flexible, fast-paced environment. This is an excellent opportunity for an experienced Configuration Management Analyst in Herndon, Virginia for a major government agency program! Individual will support the project by performing Configuration Management functions to include the following responsibilities and duties: Maintain and support current ClearCase/ClearQuest configurations. Be able to install, configure, administer, and trouble shoot ClearCase and ClearQuest independently; Provide the overall architecture design, define the roles and responsibilities and produce documentation associated with the tasks; Ensure that the backups and restore procedures and documented and tested; Maintain logs and metrics; Establish reports; Ensure that documentation is current; Provide support and training for new employees as needed; Maintain/Update ClearQuest schemas based upon requirements. Develop the roles, actions, behaviors, scripts, triggers, forms and reports within the ClearQuest tool. Additional Responsibilities: Establish and maintain the integrated software baselines for all releases; Coordinate and participate in activities involved with release deployments; assemble software configuration items from baseline to create packages for deployment; assemble software configuration items to provide pre-release baselines to partners for verification/review. Security Clearance Required. Job requirements: - Proficient with Clearcase/Clearquest administration and design - Proficien